Changes are made by making valid edits to the discrete parameters and then selecting the
Save button. We advise you to make a copy of your settings in advance of making any
changes.
Robots equipped with the improved Furhat Projection System (FPS) which supports software
6
based focus control from within FurhatOS have an additional focus control panel inside settings.
FPS focus adjustment may be required in conjunction with the use of custom face masks, or as
part of periodic maintenance activities. Select the Up-Arrow and Down-Arrow buttons one
6
Robot Hardware revisions of 2.3.1 and later / Robots from Furhat-319 and onwards
Copyright Furhat Robotics AB © 2020 - Commercial In Confidence
To Next Page
Loading...