6. ECDIS Overview
6-15
Using planned user chart
To check if planned user chart is selected, open the Selections
page in the Monitor Route menu to check that you have the
correct user chart in the monitoring mode.
If the text "Current selection is different" is displayed, click the
Use button to select user chart as monitoring mode.
If the text "This has been changed after Route Planning Check" is
displayed, re-check your route against chart alerts.
Using planned Notes
To check if planned Notes is selected, open the Selections page in
the Monitor Route menu to check that you have correct Notes in
the monitoring mode.
If the text "Current selection is different" is displayed, click the
Use button to select Notes as monitoring mode.
The text "This has been changed after Route Planning Check"
reminds you that Notes has been modified after route planning
check.
To Next Page
Loading...
