Furuno FCR-2107 series - A4.5.2 Use of Multiple Databases

Appendix 4: C-MAP CM-93/3 Charts
AP-36
A4.5.2 Use of multiple databases
It is possible to use CM93/3 Professional, CM93/3 Professional + and CM-ENC databases at the same time at the
same workstation.
1. Menu -> Chart Menu -> C-Map Ed3 -> Load and register for use. The following dialog box appears;, insert CD
ROM/DVD.
2. Click Load database to hard disk button.
3. Wait until loading process completed.
4. You can see loaded database version and issue date.
Above is an example where CM-ENC and CM93/3 Professional databases are loaded into ECDIS.