FUTABA 4pls User Manual

DT3
DT4
ATL display
Steering D/R
display
DT2
DT1
Steering trim display
Throttle trim display
21
Before Using
Trim Operation
Digital Trim Operation
(Initial settings: DT1: Steering trim, DT2: Throttle trim,)
Operating by the lever: Push the lever to the left or right (up or down) The current posi-
tion is displayed on the LCD screen.
s%ACHSTEPISINDICATEDBYATONE
s7HENTHETRIMEXCEEDSTHEMAXIMUMTRIMADJUSTMENTRANGETHEBEEPWILLCHANGEANDTHESERVOWILLNOTMOVE
any farther.
s4RIMLEVERADJUSTMENTSHAVENOEFFECTONTHEMAXIMUMSERVOTRAVEL4HISPREVENTSTHELINKAGESFROMBINDING
when adjustments are made.
Grip Lever Operation
(Initial setting: DT3; Steering D/R, DT4; ATL)
Operate the dials by turning them. The current set value is displayed on the LCD screen.
s%ACHSTEPISINDICATEDBYATONE
s7HENTHETRIMEXCEEDSTHEMAXIMUMTRIMADJUSTMENTRANGETHETONEWILLCHANGEPITCHANDTHESERVOWILLNOT
move any farther.
With the center trim feature, trim adjustments have no effect on the maximum
servo travel. This prevents the linkages from binding when adjustments are made.

FUTABA 4pls Specifications

General

Brand	FUTABA
Model	4pls
Category	Receiver
Language	English