23
Before Using
Trigger Slide Adjustment
The throttle trigger position can be moved forward and backward.
Adjustment
1
Using a 2.5mm hex wrench, loosen the trigger
slide mounting screw by turning it slightly coun-
terclockwise.
2
Using a 2.5mm hex wrench, turn the trigger
slide adjusting screw, and adjust the trigger
slide position within the marked range. When
the adjusting screw is turned clockwise, the trig-
ger slide moves away from the grip handle.
3
Retighten the mounting screw loosened at step
1 and fasten the trigger slide.
Trigger slide adjusting screw
Adjust so that the bottom
mark does not exceed
the top marking line.
Trigger slide
mounting screw
Warning
Antenna Moving Range
Adjust the antenna vertically
to the ground.
Antenna
AB
About The Transmitter Antenna
Adjust the antenna vertically to the ground.
Otherwise, the operating range may become shorter.
The antenna position can be changed in the range as shown in figures A and B. However, please
do not apply unnecessary force or shock.
The internal cable may be damaged; thus transmitting distance decreases and it may cause malfunction.
Never hold only the antenna.
Hold the grip handle. Otherwise, the antenna may be damaged.
About Transmitter Antenna and Receiver
To Next Page
Loading...
Need help?
General
