To Next PageTo Next Page
Need help?Do you have a question about the FUTABA Mold Marshalling System MPS08 and is the answer not in the manual?
Essential safety instructions and precautions for operating the product, including general and specific warnings.
An overview of the Mold Marshalling System and its main functions, detailing key capabilities.
List of all accessories provided with the MPS08 system, ensuring all items are accounted for.
Guidelines for safe operation, environmental limits, and proper care of the system components.
Visual representation of how system components, including sensors and amplifier, connect.
Details of the MPS08 amplifier's front panel display and control keys.
Explains the function of each connector and terminal on the rear of the MPS08.
Steps for network configuration and installing the measurement software on a PC.
Instructions for updating the PC software and the amplifier's firmware.
Steps for installing the pressure sensor, junction box, and amplifier.
Detailed guide on connecting the system's various components, including cables.
How to connect input and output signals for external control and monitoring.
Instructions for safely connecting the AC power adapter to the system.
Safe methods for turning the amplifier's power on and off.
Using the amplifier's keys and understanding the LCD display.
Operating the amplifier independently without PC connection.
Procedures for launching and closing the measurement application.
How to select the desired display language for the software.
Identification and explanation of the software's main screen elements.
Configuring measurement parameters like time span, sampling, and trigger.
Inputting sensitivity values and physical characteristics for sensors.
Defining thresholds and criteria for alarm notifications.
Procedures for saving, overwriting, and retrieving configuration settings.
Choosing operational modes and loading configuration files for measurement.
Initiating measurements and visualizing pressure data.
Loading and viewing past waveform data for comparison.
Overlaying multiple waveforms and using cursor tools for data analysis.
Zooming, panning, and fitting waveform views for better analysis.
Changing waveform colors and other display preferences.
Details on saving various data types and checking disk space.
Settings typically managed by an administrator, like IP address.
Verifying the LAN connection status between the amplifier and PC.
Confirming the proper operation of input and output signals.
Procedures for calibrating and performing a quick operational check of sensors.
How to connect external equipment to the MPS08's voltage output.
Setting up voltage output and viewing data with external loggers.
Detailed technical specifications for the pressure measuring amplifier.
Technical specifications for system accessories like cables and adapters.
General