Safety Precautions (Be sure to read before use)
Before Use
Before using the product, read this “Safety Precautions” and the instruction manual carefully.
After reading the manual, keep it in a safe place so that it can be used whenever needed.
When using the product, be sure to observe the following safety precautions.
Futaba Corporation assumes no liability for the injury caused by using the product contrary to these
precautions.
This manual uses the following alert symbols for safe use of the product.
General Precautions
When starting product operation, make sure in advance that the functions of the product are normally
working with normal performance.
If the product fails, use adequate safety measures to prevent various types of damage.
Note that we cannot guarantee the functionality and performance for use of the product not conforming to
the specifications or any remodeled product.
When using the product in combination with other equipment, evaluate it thoroughly because the
functionality and performance may not be satisfactory depending on the use conditions and environment.
Precautions
Failure to observe the instructions with this symbol could result in death or
serious personal injury.
Failure to observe the instructions with this symbol could result in injury or
only damage to property.
Use the AC adaptor that comes with the product.
Using any other AC adaptor could result in device damage or failure.
When installing the product or connecting cables, be sure to disconnect the power
cable from the outlet in advance.
It could result in electric shock or malfunction.
Do not use a broken cable or a cable with a flaw in the covering.
It could result in fire, electric shock, or device damage or failure.
Use the power to the AC adaptor within the range (100 to 240 V) stipulated in the
specifications. Using power outside the range could result in fire or device damage
or failure.
Keep the sensor, amplifier, Junction box, and Junction cable away from water.
It could result in electric shock or device damage.
To Next Page
Loading...