FUTABA Mold Marshalling System MPS08 - Page 38

35
In the Administration menu, it is possible to
change IP address of MPS08 and saved data
destination of data and setting file.
No.
Term
Function
①
IP Address of MPS08
・Set the IP Address of MPS08.
Set IP Address will be valid after rebooting of application.
②
Data Destination
・Set the Path for saved data.
Set Path will be valid after rebooting of application
・Default settings is as follows.
＜In the case of Windows XP＞
C:¥Documents and Settings¥User name¥MMS_DATA
＜In the case of Windows 7 or Windows 8＞
C:¥Users¥user name¥MMS_DATA
③
Settings Destination
・Set the Path for saved Settings.
Set Path will be valid after rebooting of application
＜In the case of Windows XP＞
C:¥Documents and Settings¥user name¥MMS_Settings
＜In the case of Windows 7 or Windows 8＞
C:¥Users¥user name¥ MMS_Settings
④
OK
・Save changes and show the following message.
Click [OK] and then application will exit.
⑤
Cancel
・Cancel setting changes to exit the Administrator Setting.
①
②
③
④
⑤