Futek IPM650 - Auto Detection

- 109 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
7.8.4 Auto Detection
Scroll to “AUTO DETECTION” from “TEDS DATA” using the▲▼ keys and press ENTER.
If “AUTO DETECTION” is enabled, the IPM650 will search for a TEDS device during power up. If TEDS
information exists, its information will be loaded; otherwise the IPM650 will load the active channel.
If “AUTO DETECTION” is disabled, the IPM650 will load the active channel during power up.
Use the ◄► keys to Enable or Disable the TEDS Auto Detection feature
The following message will be displayed confirming the operation was executed successfully.
OPERATION
WAS EXECUTED
SUCCESSFULLY
(HIT ENTER/BACK)
SELECT DESIRED
ACTIVITY
USING ◄,► KEYS
[ENABLE]
TEDS PAGE
LOAD DATA
► AUTO DETECTION
------------