Futek IPM650 - USB Output

- 85 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
7.5.1 USB Output
Scroll to “USB OUTPUT” from “INTERFACE” using the▲▼ keys and press ENTER.
Use the◄►keys to either enable or disable the USB output activity.
A prompt will be shown to set this value as a default setting.
Whenever the USB Output is enabled a check mark showing that this feature is enabled will be seen on
the display.
WOULD YOU LIKE
TO SAVE AS
DEFAULT?
<YES> <NO>
SELECT DESIRED
ACTIVITY
USING ◄,► KEYS
[ENABLE]
► USB OUTPUT¾
ASCII OUTPUT
RELAY1 OUTPUT
RELAY2 OUTPUT