- 68 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
7.2.6 Auto Reset
Scroll to “AUTO RESET” from “SYSTEM SETTING” using the ▲▼ and press ENTER.
Auto Reset will reset the peak and valley values when the timer is expired. The time, in seconds, is
defined in the sensor profile. Refer to section (6.1.3.9.6) for more detail.
Using the◄►keys select to enable or disable the Auto Reset function.
A prompt will be shown to set this value as a default setting.
WOULD YOU LIKE
TO SAVE AS
DEFAULT?
<YES> <NO>
SELECT DESIRED
ACTIVITY
USING ◄,► KEYS
[DISABLE]
SAMPLING RATE
PEAK / VALLEY
► AUTO RESET
ALARM CONFIG
To Next Page
Loading...
