Futek IPM650 - Delete Channel

- 57 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
7.1.6 Delete Channel
Scroll to “DELETE CHANNEL” from “SENSOR PROFILE” using the▲▼ keys and press ENTER. Use
the ◄►keys to select the channel to delete. Choose Accept or Cancel to confirm or cancel the operation.
Note: Any channel other than the first channel can be deleted.
Attempting to delete channels when no channel has been set, besides channel one, which is set by default,
will result in the following warning message.
If the channel chosen to be deleted is already set as active channel, the following message will be given:
SELECT DESIRED
CHANNEL NUMBER
USING ◄,► KEYS
[02]
THERE IS NOT
ANY CHANNEL
AVAILABLE FOR
THIS INTENTION
EDIT CHANNEL
SAVE CHANGES
► DELETE CHANNEL
-----------