Futek IPM650 - Channel Select

- 62 -
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905
7.2.2 Channel Select
Scroll to “CHANNEL SELECT” from “SYSTEM SETTING” using the▲▼ keys and press ENTER.
Use the ◄► keys to select the desired number. If no other channels have been added, only channel 01
can be selected, which is the default channel.
After selecting the desired channel, there is the option of setting it as the default channel. Use BACK to
select NO and return to the system setting option. By selecting YES, the selected channel will be set as the
default channel.
WOULD YOU LIKE
TO SAVE AS
DEFAULT?
<YES> <NO>
AUTO CALIBRATION
IN PROGRESS
PLEASE WAIT 15
………
LOADING PROFILE
IN PROGRESS
PLEASE WAIT 30
SELECT DESIRED
CHANNEL NUMBER
USING ◄,► KEYS
[01]
DIGIT SELECT
► CHANNEL SELECT
MOVING AVERAGE
SAMPLING RATE