Need help?Do you have a question about the Ganz IP Camera and is the answer not in the manual?
How to find the device's unique IP address by converting the MAC address's last two hexadecimal numbers.
Steps to install the ActiveX control for full control of the device through a web browser.
Details recommended PC system requirements for using the web browser with the products.
Instructions on how to access the device via the web browser using username and password.
Explains the various menus and options available on the live camera view page.
How to search mounted USB/SD storage devices, check their information, and control them.
Configuration for AVI recording, including storage options, conditions, and instant recording.
Provides menus for essential settings required after camera installation.
How to create, remove, and modify user accounts for web access.
Configuration settings for TCP/IP, including DHCP, static IP, and DNS.
Setting the camera's date, time, and time zone for logs and burnt-in text.
General section for video and audio related settings.
Creates pre-defined profiles for video encoding settings for streams.
Sets up notification for events, configuring event sources and notification methods.
Sets up zones and rules for motion detection, including sensitivity and object size.
Configures the list of email recipients for event notifications.
Configures IP addressing (DHCP, static) and DNS server settings.
Configures RTSP/RTP settings for stream bandwidth, unicast, and multicast.
Configures email account and server settings for event notifications.
Procedures for updating the device firmware via tool or web browser.
Resets system settings to factory default, excluding user, network, and time zone.
Steps to reboot the system via the web browser.
Displays product information including hardware specs and software version.
To Next Page
General