12 System Setup
4 Restart your computer. The setup is complete.
Turning off your computer
Every time you turn off your computer, shut down the operating system first.
You may lose data if you do not follow the proper procedure.
To turn off your computer in Windows NT:
1 Click Start, then select Shut down the computer?, then Shut Down.
2 Click OK. The computer turns off. If you see a message saying It is now
safe to turn off your computer
, turn off the computer by pressing the power
button.
3 Turn off the monitor and peripherals.
Important For other operating systems, such as Windows
®
2000,
refer to the appropriate operating system software manual
for setup instructions.
Warning When you turn the computer off by pressing the power
button, some electric current still flows through the
computer. Before opening the computer case or
connecting or removing any peripherals, turn off the
computer, then unplug the power cord and modem cable
(if installed) or you may get an electric shock.
Important For other operating systems, such as Windows
®
2000,
refer to the appropriate operating system software manual
for instructions.
8506999.book Page 12 Friday, December 15, 2000 8:22 AM
To Next Page
Loading...
Need help?
General
