GCC Technologies P3-60 - Page 128

Puma III User Manual
GreatCut Plug-In A-5
Click on the Multi-copy Icon on the GreatCut toolbar and complete the Number in X/Y (the
number of copies desired on the X/Y axis) and Distance in X/Y (distance between each copy)
settings then click OK.
Note: The spacing of vertical & horizontal (Offset X & Y) should be ≥ 20mm or = 0mm; Users are
advised to set the Distance in X/Y as 0 mm to remove the space between each copy to avoid the
waste of materials.