GCC Technologies P3-60 - Blade Specification

Puma III User Manual
Blade Specification A-2
Blade Specification
20200159G
For cutting thick fluorescent and reflective vinyl. Also for cutting
detailed work in standard vinyl.
The blade is 45° with Red Cap (5-unit package), 0.25 mm offset
,
and 2 mm blade diameter.
265012020G
For cutting reflective vinyl, cardboard, sandblast, flock, and
stencil sharp edge.
The blade is 60° with Green Cap, 0.50 mm blade offset, and 2
mm blade diameter.
26500059G
For cutting thin sandblast mask and stencil with friction feed or
sprocket feed machine.
The blade is 60° with Blue Cap, 0.25 mm blade offset, and 2
mm blade diameter.
26500060G
For Cutting small text and fine detail. Sharp blade with smallest
offset.
The blade is 50° with Black Cap, 0.175 mm blade offset, and 2
mm blade diameter.
202003090G
For thin and delicate media such as window tint.
The blade is 25° with Yellow Cap (5-unit package), 0.25 mm
blade offset, and 2 mm blade diameter.