Puma III User Manual
Installation 2-35
2.7.2.2 Manually Activate Software
If the computer connected to cutter doesn’t have internet connection to
accomplish above software activation process, you can use “Activate manually”
function alternatively to enter the “Activation Code” to start the usage of Sure
Cuts A Lot. Meanwhile, you need to find another computer that has internet
access to obtain the “Activation Code” in advance following below instructions.
Step 1 Check the "Activate manually" checkbox and you should see the Site
Code and Activation Code fields appear. The Site Code field will be
pre-filled in and cannot be changed.
Step 2 Visit http://www.craftedge.com/activation/surecutsalot via an internet
connected computer. Enter your name, serial (software key, shows on
the DVD cover) and site code.
Step 3 Click on the "Generate Activation Code" button, and your activation code
will be shown in the Activation Code field.
To Next Page
Loading...
