GCC Technologies P3-60 - 4-Point Positioning

Puma III User Manual
CorelDRAW Plug-In A-3
4-Point Positioning
The system will create the 4 marks as shown in the picture below.
4-Point Positioning
 Length: The length of marks
 Range: 5mm~50mm
 Optimized Setting: 25mm
 Thickness: The line thickness of marks
 Range: 1mm~2mm
 Optimized Setting: 1mm
 Margin: The distance between marks and images
 Range: 0mm~50mm
 Optimized Setting: 5mm
Figure A3-5
Figure A3-6