Revision C 170 Series Monitor 7-3
2000947-004
Serviceable Assemblies: Transducer Plug Replacement Kits
Transducer Plug Replacement Kits
Refer to Table 7-2 and ensure you have the correct kit. Unpack the kit and ensure it
contains the items listed in Table 7-1. If something is missing, contact your GE
Service Representative immediately.
Table 7-1. Kit Summary
Plug Type
Plug Kit
Cat. No. (REF)
Tocotransducer Cable:
Trimline, 2260 Series
Nautilus, 2264 Series
6158J
Ultrasound Transducer Cable:
Standard, 5700 Series
Nautilus, 5700 Series
8675A
FECG Cable/Legplate 6158F
Table 7-2. Packing List
Item Quantity
Contact Pin, male, #24 AWG, 16.5 mm 11
Contact Pin, male, #24 AWG, 18 mm 1
Gripper of appropriate size:
3-5 mm for smaller cables
(TOCO)
5-7 mm for larger cables
(US, FECG)
1
Plastic Ring 21.8 x 4 mm 1
Retaining Ring 1
Strain Relief Clamp, 3-7 mm 1
Screw (for above clamp), M 2.6 x 10 2
Half-Shell with Clamp of appropriate size:
3-5 mm for smaller cables
5-7 mm for larger cables
1
Half-Shell with Tongue 1
Color-Coded Connector Plug, 12-pin 1
Oetiker Clamp
a
a
The Oetiker clamp is used only for Nautilus Tocotransducers
(2264 Series).
1
To Next Page
Loading...
Need help?
General
