To Next PageTo Next PageWhat to do if my GE Druck DPI612 unit will not connect / write to USB Memory Stick?
If your GE Test Equipment unit does not connect to or write to the USB Memory Stick, it might be because USB flash drives with a capacity of 1GB can take a few seconds to fully connect. Try using a smaller capacity USB Drive.
General| Type | Pressure Calibrator |
|---|---|
| Accuracy | ±0.025% of full scale |
| Pressure Units | bar, psi, kPa, MPa |
| Display | Graphical LCD |
| Battery Life | Up to 8 hours |
| Operating Temperature | -10 to 50 °C |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
| Communication Interface | RS232 |
| Certifications | CE |
The part number for the DPI 612 Portable Pressure Calibrator User Manual.
Essential safety guidelines for operating and maintaining the DPI612 instrument.
Safety measures related to the electrical input and connections of the DPI612.
Critical safety warnings and precautions for handling rechargeable battery packs.
Important safety warnings concerning pressure operations and connections.
Steps to perform before the first use, including checking for damage and missing items.
Instructions for installing rechargeable and dry cell batteries in the instrument.
Basic operations applicable to all DPI612 models, including attaching devices.
Procedures for using the DPI612 pFlex and pFlexPro for pressure operations.
Instructions for the DPI 612 hFlexPro, including filling, priming, and pressure application.
Procedures for checking and adjusting the instrument's calibration.
Detailed steps for calibrating the current measure and source functions.
Steps for calibrating the pressure indicator function of the DPI612.
Common fault symptoms and their possible causes and checks for DPI 612 models.
