GE LOGIQ E9 Service Manual

GE
D
IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL
Chapter 3 LOGIQ E9 Setup 3 - 77
Encoded Value in the “Status” tag
Other times, however, the actual reason for an issue is often encoded in innocuous-looking entries
near the end of the exchange. For example, the above situation involved the attempting to send an
image to Viewpoint directly via a print button, without a patient id. Viewpoint’s “C-STORE-RSP”
message to the indicated, by an encoded value in the “Status” tag, that it did not store the image.
(continued on next page)
Table 3-30 Network “Sniffer”

GE LOGIQ E9 Specifications

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor