To Next Page

To Previous Page

IRECTION 5535208-100, REV. 2 LOGIQ E9 SERVICE MANUAL

4 - 26 Section 4-2 - General procedures

4-2-11-9 Admin — Recording the Software Option Keys

1.) From the Touch Panel, select Utility -> Admin -> System Admin.

2.) Record the S/W Option Key(s) - alphanumeric string(s) - from the Installed Option Keys field in Table

4-10 "Software Option Keys" on page 4-26.

Figure 4-19 System Admin settings

WARNINGWARNING

Make sure that the Software Option Keys (alphanumeric passwords) have been

recorded correctly. If the key is incorrect, you will not be able to log on after the SW

installation has been completed. The password is case sensitive. Hyphens must also

be recorded. There may be more than one password.

Table 4-10 Software Option Keys

SW OPTION KEYS

Other manuals for GE LOGIQ E9

Questions and Answers:

Need help?

Do you have a question about the GE LOGIQ E9 and is the answer not in the manual?

General

Type	Ultrasound System
3D/4D Imaging	Yes
Transducer Ports	4 active ports
Connectivity	DICOM, USB, Ethernet
Applications	Abdominal, Vascular, Musculoskeletal, Small Parts, Urology, Pediatric, Cardiac, Obstetrics/Gynecology
Transducers	Linear, Convex, Phased Array, Volume
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Elastography	Yes
Advanced Features	B-Flow, Volume Navigation
Portability	Cart-based system
Display	19-inch high-resolution LCD monitor