GE LOGIQ V1 Basic Service Manual

System Setup
3-26 LOGIQ V2/LOGIQ V1 – Basic Service Manual
5610739-100 English Rev.10
HP Officejet Pro 8100 Printer Installation
Tools
No special tools needed.
Manpower
One person 5 min.
Preparations
1. Unpack the HP Officejet Pro 8100 Printer.
Installation Procedure
1. Place the device in a suitable place.
2. Connect the USB Cable on the Printer.
3. Connect the power cord with the AC output in the wall outlet,
then turn on the printer.
4. Connect USB cable to LOGIQ V2/LOGIQ V1 USB port.
Figure 3-11. HP Officejet Pro 8100 connection
5. Refer to the Connectivity configure steps of ‘Sony
UP-D25MD Printer Installation’ on page 3-22.

GE LOGIQ V1 Specifications

General

Brand	GE
Model	LOGIQ V1
Category	Medical Equipment
Language	English