GE LOGIQ V1 Basic Service Manual

Loading the software
LOGIQ V2/LOGIQ V1 – Basic Service Manual 7-19
5610739-100 English Rev.10
Loading the System Software with USB memory stick (For R1.0.x)
(continued)
6. Select Finish when the upgrade process completes and the
system will shutdown automatically.
Figure 7-4. System upgrade complete
7. Remove the USB memory stick and then press Power On/
Off switch to power on the system.
NOTE: If you do not remove the USB memory stick, the software
system loading process repeats when the system boots up.

GE LOGIQ V1 Specifications

General

Brand	GE
Model	LOGIQ V1
Category	Medical Equipment
Language	English