Scheduled Turbine MaintenanceInspection and Maintenance — GEK 107048
STM-11
MS-6001B DLN–1 — OPERATING DATA (CONT’D)
— CRANKING CHECKS (Final Settings) —
(VCE) (Gas Control Valve) (Fuel Pump)
1. Fuel Pump or Gas Valve Stroke
Fire
Warmup
Acceleration
Maximum
Minimum
(Pickup) (Drop Out)
2. Speed Relay Settings (turbine speed)
14HM
14HA
14HS
14HR
3. Overspeed
Gas Turbine , ,
Start Device (if applicable) , ,
— MISCELLANEOUS —
Lube Tank Level
Cooling Water Tank Level
To Next Page
