Inspection and Maintenance — GEK 107048Standard Practices
SP-42
MS-6001B DLN-1
Combustion Inspection
Recommended Spare Parts
Note: Refer to your Parts Volume Service Manual to obtain the proper draw-
ing and/or part number for the material listed under each arrangement
or assembly drawing.
Recommended
Quantity
PRIMARY FUEL NOZZLE ASSEMBLY (ML0513)
1. Tip Assembly (Gas) 50
**2. Lockplate (Tip Assembly to Body) 50
SECONDARY FUEL NOZZLE ASSEMBLY (ML0566)
1. Outer Gas Tip 10
**2. Lockplate (Outer Tip to Body) 10
3. Piston Ring 10
4. Spiral Wound Gasket (Flame Detector Flange) 10
5. Bolt, Hex Head (Flame Detector Flange) *8
COMBUSTION CHAMBER ARRANGEMENT (ML0701)
**1. Gasket (Cover to Outer Combustion Casing) 10
2. Gasket (Comb. Outer Casing to Compressor Discharge Casing) 10
3. Bolt, Twelve Point Head (Outer Casing to Compressor Discharge Casing) *40*
4. Flow Sleeve, Combustion 10
5. Steel Pan Head Machine Screw (Flow Sleeve Mounting Screws) *16*
6. Ring Packing (Crossfire Tube) 40
7. Bolt, Twelve Point (Nut, Packing Gland) *16*
8. Crossfire Tube Combustion (Male) 10
9. Crossfire Tube Combustion (Female) 10
10. Spring (Crossfire Tube Retainer) 20
To Next Page
Loading...
