GE MS-6001B - Combustion Inspection Forms; Hot Gas Path Inspection Forms

To Next Page

To Previous Page

Inspection and Maintenance — GEK 107048Maintenance Forms

MF-2

PGS/GT-FF-6108 MS-6001 Series Inlet Guide Vane, General Condition and Clearances

PGS/GT-FF-6109 MS-6001 Series Number 1 Bearing and Seal Clearances

PGS/GT-FF-6110 MS-6001 Series Number 2 Bearing and Seal Clearances

PGS/GT-FF-6111 MS-6001 Series Second Stage Nozzle, General Condition

PGS/GT-FF-6112 MS-6001 Series Third Stage Nozzle, General Condition

PGS/GT-FF-6113 MS-6001 Series Accessory Coupling

PGS/GT-FF-6114 MS-6001 Series Load Coupling, Runout and Bolt Elongation Data

PGS/GT-FF-6115 MS-6001 Series Coupling Alignment

PGS/GT-FF-6116 MS-6001 Series Sleeve Journal Bearings

PGS/GT-FF-6117 MS-6001 Series Thrust Bearings

PGS/GT-FF-6124 MS-6001 Series Unit Casing Jacking Record

PGS/GT-FF-6403 MS-6001B DLN-1 Combustion System Casing

PGS/GT-FF-6404 MS-6001B DLN-1 Combustion System (Crossfire Tube and Spring Retainers)

PGS/GT-FF-6406 MS-6001B Combustion Systems Liner (Slot Cooled Liner)

PGS/GT-FF-6407 MS-6001B Transition Piece

PGS/GT-FF-6408 MS-6001B DLN-1 Transition Piece Installed Clearances

PGS/GT-FF-6409 MS-6001B DLN-1 Series Flowsleeves

PGS/GT-FF-6410 MS-6001B DLN-1 Spark Plug — Ball Joint

PGS/GT-FF-WS01 MS-6001B DLN-1 Combustion Systems (Liner)

PGS/GT-FF-WS26 MS-6001B DLN-1 Primary Fuel Nozzle End Cover

PGS/GT-FF-WS27 MS-6001B DLN-1 Primary Fuel Nozzle

PGS/GT-FF-WS28 MS-6001B DLN-1 Secondary Fuel Nozzle

To facilitate the planning of your maintenance, the forms have been listed in sets to reflect their use in the dif-

ferent inspections.

Combustion Inspection TN # 1019 (DLN-1)

PGS/GT-FF-6000 Site Information

PGS/GT-FF-6026 TIL’s/FMI’s Applied

PGS/GT-FF-6027 Renewal Parts