Maintenance FormsInspection and Maintenance — GEK 107048
MF-5
PGS/GT-FF-6124 MS-6001 Series Unit Casing Jacking Record
PGS/GT-FF-6403 MS-6001B DLN-1 Combustion System Casing
PGS/GT-FF-6404 MS-6001B DLN-1 Combustion System (Crossfire Tube and Spring Retainers)
PGS/GT-FF-6406 MS-6001B Combustion Systems Liner (Slot Cooled Liner)
PGS/GT-FF-6407 MS-6001B Transition Piece
PGS/GT-FF-6408 MS-6001B DLN-1 Transition Piece Installed Clearances
PGS/GT-FF-6409 MS-6001B DLN-1 Series Flowsleeves
PGS/GT-FF-6410 MS-6001B DLN-1 Spark Plug — Ball Joint
PGS/GT-FF-WS01 MS-6001B DLN-1 Combustion Systems (Liner)
PGS/GT-FF-WS26 MS-6001B DLN-1 Primary Fuel Nozzle End Cover
PGS/GT-FF-WS27 MS-6001B DLN-1 Primary Fuel Nozzle
PGS/GT-FF-WS28 MS-6001B DLN-1 Secondary Fuel Nozzle
The completed Inspection Report Forms should be supplemented by additional text, sketches, photographs,
etc., as dictated by individual job requirements. A copy of each of the completed forms should be submitted
to your General Electric Company Field Service office. Additional copies of the blank forms may be obtained
from your General Electric Company Field Service Representative.
To Next Page
