GE Multilin 850

5–6 850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
CONTACT INPUTS CHAPTER 5: STATUS
Contact Inputs
Path: Status > Contact Inputs
The status of the Contact Inputs is shown here (see device menu via the menu path). The
‘Off/On’ display indicates the logic state of the Contact Input.
Output Relays
Path: Status > Output Relays
The status of all output relays is shown here, see above. In the “ITEM NAME” column, the
value indicates the label on the output terminal. The value column indicates the present
ON or OFF state of the output relay.
Output Relay 1 (TRIP)
Path: Status > Output Relays
The status of all output relays is shown here, see above. In the “Item” column, the value
indicates the label on the output terminal. The value in the “Name” column indicates the
name given to the output relay. In this case, Trip relay is named “Output relay 1”. The value
in the column “Value” indicates the logic state of the output relay, it can be “On” or “Off”.
Output Relay 2 (CLOSE)
Path: Status > Output Relays
The status of all output relays is shown here, see above. In the “Item” column, the value
indicates the label on the output terminal. The value in the “Name” column indicates the
name given to the output relay. In this case, Output relay is named “Output relay 2”. The
value in the column “Value” indicates the logic state of the output relay, it can be “On” or
“Off”.