GE Multilink ML3000 User Manual

CHAPTER 16: SNMP SNMP
MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL 16–11
The following window illustrates changes to the SNMP community parameters. It is
recommended to change the community strings from the default values of public and
private to other values.
 When done changing the community strings, click OK.
Multiple managers can be added as shown below.
 When adding SNMP manager stations, click on the Add button on
the SNMP menu screen.
 Make sure that each station can be pinged from the switch by using
the Configuration > Ping menu.

GE Multilink ML3000 Specifications

General

Brand	GE
Model	Multilink ML3000
Category	Network Router
Language	English