GE Multilink ML3000 User Manual

16–12 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
SNMP CHAPTER 16: SNMP
 When done adding stations, click OK.
 When adding SNMP trap receivers, click on the Add button on the
SNMP menu screen.
 Make sure that each station can be pinged from the switch by using
the Administration > Ping menu.
 Determine which sorts of traps each station will receive, as shown
above. If not sure, select all three types.
 When done adding trap receivers, click OK.

GE Multilink ML3000 Specifications

General

Brand	GE
Model	Multilink ML3000
Category	Network Router
Language	English