GE PACE Series

PACE Series SCPI Manual
K0472 Revision A 4-77
SENS:SPE:RANG
Applicability: PACE1000, PACE6000
Command Syntax
SENSe[2]:SPEed:RANGe
where x = 1 or 2 is the module number (default - 1)
Parameter:
Short form: SENS:SPE:RANG
Function: Sets the airspeed range.
Query Syntax
SENSe:SPEed:SLEW?
Short form: SENS:SPE:RANG?
Function: This query reads the airspeed range.
Response: A string (number), representing the airspeed range in pressure units.
example: 3.50 barg
Description
Queries the airspeed range.
Note: If the instrument is not in aero mode it records an error: -221. Settings conflict.