GE PACE Series

4 Command and Query Summary
K0472 Revision A 4-40
SENS:ALT:SLEW
Applicability: PACE1000, PACE6000
Command Syntax
SENSE:ALTitude:SLEW
Parameter: <string>
Short form: SENS:ALT:SLEW
Function: Sets the rate set-point for altitude slew.
Default: -
Query Syntax
SENSe:ALTitude:SLEW?
Short form: SENS:ALT:SLEW?
Function: Queries the rate set-point for altitude slew.
Response: Decimal number representing the rate set-point for altitude slew
(rate of climb) or (vertical speed) in current units.
Description
This command sets the rate set-point for altitude slew. The query gets the rate set-point for
altitude (rate of climb) or (vertical speed) per second or minute.
Note: If the instrument is not in aero mode it returns an error: -221. Settings conflict.