GE PACE Series

4 Command and Query Summary
K0472 Revision A 4-4
:CAL:PRES:ACC
Applicability: PACE1000, PACE5000, PACE6000
Command Syntax
:CALibration[x]:[PRESsure]:ACCept
where: x (module) = 1 or 2 (default - 1)
Parameter: Integer 1
Short form: :CAL[x]:ACC
Function: Accepts calibration values
Defaults: no default value
Query Syntax
n/a
Short form:
Function:
Response:
Description
Valid only when calibration is enabled, this command accepts the calibration values entered
in the calibration process.