GE PACE Series

PACE Series SCPI Manual
K0472 Revision A 4-37
:SENS:ALT:INL
Applicability: PACE6000
Command Syntax
:SENSe[x][:ALTitude]:INLimits <number>
where x = 1 or 2 is the module number (default - 1)
Parameter: <decimal> in limits value as % full-scale
Short form: :SENS:INL <number>
Function: The instrument has an in-limits indicator. This can generate a
service request when the pressure is within limits for a set time period.
Default: 0.01 % full-scale
minimum 0 % full-scale
maximum 100 % full-scale
Query Syntax
:SENSe[x][:ALTitude]:INLimits?
where x = 1 or 2 is the module number (default - 1)
Short form: :SENS:INL?
Function: Query in-limits value
Response: Decimal representing in-limits value as % full-scale.
Description
Sets the in-limits value.
Note: If the instrument is not in aero mode it returns an error: -221. Settings conflict.