GE PACE Series

4 Command and Query Summary
K0472 Revision A 4-46
:SENS:MACH:INL:TIME
Applicability: PACE6000
Command Syntax
:SENSe[x][:MACH]:INLimits:TIME <number>
where x = 1 or 2 is the module number (default - 1)
Parameter: <integer> MACH in-limits time in seconds
Short form: :SENS:MACH:INL:TIME <number>
Function: Sets the time that the MACH value has to be within limits before
generating a service request.
Default: 2 seconds
minimum 2 seconds
maximum 999 seconds
Query Syntax
:SENSe[x][:MACH]:INLimits:TIME?
where x = 1 or 2 is the module number (default - 1)
Short form: :SENS:MACH:INL:TIME?
Function: Query MACH in-limits timers.
Response: Number representing MACH in-limits time in seconds.
Description
Sets the MACH in-limits timer value.
Note: If the instrument is not in aero mode it returns an error: -221. Settings conflict.