4 Command and Query Summary
K0472 Revision A 4-78
SENS:SPE:SLEW
Applicability: PACE1000, PACE6000
Command Syntax
SENSe[2]:SPEed:SLEW
where x = 1 or 2 is the module number
(default - 1)
Parameter:
Short form: SENS:SPE:SLEW
Function: Sets the airspeed rate of change.
Query Syntax
SENSe:SPE:SLEW?
Short form: SENS:SPE:SLEW?
Function: This query reads the airspeed rate of change.
Response: A decimal, airspeed reading/second.
Description
Queries the airspeed rate of change reading.
Note: If the instrument is not in aero mode it records an error: -221. Settings conflict.
To Next Page
Loading...
Need help?
General
