GE PACE5000

PACE Series SCPI Manual
K0472 Revision A 4-9
:CAL:PRES:ZERO:TIME
Applicability: PACE5000, PACE6000
Command Syntax
:CALibration[x]:[PRESsure]:ZERO:TIME
where: x (module) = 1 or 2 (default - 1)
Parameter: Numeric
Short form: :CAL:ZERO:TIME
Function: Sets timed zero in hours.
Default: -
Query Syntax
:CALibration[x]:[PRESsure]:ZERO:TIME ?
where: x (module) = 1 or 2 (default - 1)
Short form: :CAL:ZERO:TIME?
Function: Queries timed zero.
Response: Integer number in hours.
Description
This command sets the time between zeroing function. The query sends the setting in hours.