PACE Series SCPI Manual
K0472 Revision A 4-47
SENS:MACH:RANG
Applicability: PACE1000, PACE6000
Command Syntax
SENSe[2]:MACH:RANG
where x = 1 or 2 is the module number
(default - 1)
Parameter:
Short form: SENS:MACH:RANG
Function: Sets the MACH range
Query Syntax
SENSe:MACH:SLEW?
Short form: SENS:MACH:RANG?
Function: This queries the MACH range.
Response: A string (number), repesenting MACH range.
Description
Queries the MACH range reading.
Note: If the instrument is not in aero mode it returns an error: -221. Settings conflict.
To Next Page
Loading...
