GE PACE5000

PACE Series SCPI Manual
K0472 Revision A 4-115
:SYST:COMM:SER:CONT:RTS
Applicability: PACE1000, PACE5000, PACE6000
Command Syntax
:SYSTem:COMMunicate:SERial:CONTrol:RTS
Parameter: Boolean, ON or OFF
Short form: SYST:COMM:SER:RTS[x]
Function: Sets the serial communication hardware handshaking where:
[x] =
0: OFF
1: ON
Query Syntax
:SYSTem:COMMunicate:SERial:CONTrol:RTS?
Short form: SYST:COMM:SER:CONT:RTS?
Function: Queries serial communication handshaking.
Response: Returns 0 or 1.
Description
Selects serial communications hardware handshaking. The command query requests the
current serial communication hardware handshaking.
Example: 1 TX> :SYST:COMM:SER:CONT:RTS?
RX> :SYST:COMM:SER:CONT:RTS 0 //Hardware handshaking OFF.
Example
: 2 TX> :SYST:COMM:SER:CONT:RTS1 //Hardware handshaking ON.
TX> :SYST:COMM:SER:CONT:RTS? //Query again
RX> :SYST:COMM:SER:CONT:RTS 1 //Confirmed