To Next Page

To Previous Page

PACE Series SCPI Manual

K0472 Revision A 4-83

:SOUR:MACH:LEV:IMM:AMPL

Applicability: PACE6000

Command Syntax

:SOURce[x]:MACH[:LEVel][:IMMediate][:AMPLitude] <number>

where x = 1 or 2 is the module number

(default - 1)

Parameter: <decimal> in MACH number.

Short form: SOURce:MACH <number>

Function: Sets the MACH set-point

Default: 0.0

Query Syntax

:SOURce[x]:MACH[:LEVel][:IMMediate][:AMPLitude] <number>?

Short form SOURce:MACH?

Function: Programmable set-point value

Response: Decimal number representing the set-point in MACH number.

Description

This command sets the MACH set-point. This query gets the decimal number representing

the set-point in MACH number.

Note: If the instrument is not in aero mode it returns an error: -221. Settings conflict.

GE PACE5000 Technical Manual

Other manuals for GE PACE5000