PACE Series SCPI Manual
K0472 Revision A 4-11
DISPlay
The DISPlay subsystem shows the state of the display window.
:DISP:WIND
Applicability: PACE1000
Command Syntax
n/a
Parameter:
Short form:
Function:
Default:
Query Syntax
:DISP[x]:WIND?
where: x window index is 1 to 3 (top window is 1)
Short form: :DISP[x]:WIND?
Function: Asks for window for an allocated range.
Response: Disp 1, 2 or 3 and the value in the selected units.
Description
This query returns the allocated range to a particular display window.
Example:
TX> :Disp1:Wind?
RX> :DISP:WIND "979.44"
TX> :Disp2:Wind?
RX> :DISP2:WIND "993.55
To Next Page
Loading...
