GE PACE5000 Technical Manual

4 Command and Query Summary
K0472 Revision A 4-60
:SENS:PRES:CORR:HEAD:STAT
Applicability: PACE1000, PACE5000, PACE6000
Command Syntax
:SENSe[x][:PRESsure]:CORRection:HEAD:STATe <Boolean>
where x = 1 or 2 is the module number (default - 1)
Parameter <boolean>
0 - Disables head correction
1 - Enables head correction
Short form:: SENS:CORR:HEAD:STAT <Boolean>
Function: Enables/disables head correction.
Default: 0
Query Syntax
:SENSe[x][:PRESsure]:CORRection:HEAD:STATe?
where x = 1 or 2 is the module number (default - 1)
Short form: :SENS:CORR:HEAD:STAT?
Function: Query head correction state
Response: 0 - head correction off
1 - head correction on
Description
This command enables or disables the head correction compensation.
Example
TX> :SENS:PRES:CORR:HEAD:STATe?
RX> :SENS:PRES:CORR:HEAD:STAT 0
Head correction off
It can be turned on and off by:
TX> :SENS:PRES:CORR:HEAD:STATe on
TX> :SENS:PRES:CORR:HEAD:STATe off
Or by:
TX> :SENS:PRES:CORR:HEAD:STATe 1
TX> :SENS:PRES:CORR:HEAD:STATe 0

GE PACE5000 Specifications

General

Brand	GE
Model	PACE5000
Category	Test Equipment
Language	English