Chapter 6
Dome lights
124 Telligence Patient-Staff Communication System Operation Manual
Dome light alerts
Multi-section dome lights may be configured to display a variety of
colors as well as to provide constant illumination or flash at a
number of rates. Single-section dome lights provide a flashing or
steady red light depending on their configuration.
Indicator colors
Possible dome light colors are as follows:
• Two-section and four-section dome light colors — blue, red,
white, amber, green, pink, cyan, magenta, and yellow
• Single-section dome light color — red
Flash repeat rates
Dome lights can light steadily or flash repeatedly at these rates:
• Flash = 1/16 sec on, 1/16 sec off
• Fast flash = 1/4 sec on, 1/4 sec off
• Slow flash = 1 1/2 sec on, 1/2 sec off
• Steady (no flash)
Note: Two-section and four-section dome lights have a dim yellow
light in the top light section to signal dome light error status. This
fainter light signals non-communication of the dome light with the
network via flashing yellow light, and signals an unconfigured status
with one second of a flashing yellow light, one second off. When the
dome light‘s status becomes normal, the dome light extinguishes.
Buzzer repeat rates
the HC-CL4-SUPV dome light buzzes at the same rate that it is
flashing.
To Next Page
Loading...
