Chapter 4
Patient stations
Telligence Patient-Staff Communication System Operation Manual 59
Staff normal calls
• Assist light on the patient station
• Call status lights on single and dual patient stations
• Call assurance feedback tone at the patient station
• Light sections in associated corridor and zone lights show a
steady white light.
• Associated zone lights emit a very slow, repeating buzz.
• Staff normal tones sound at staff consoles and annunciators,
and at stations where the staff follow function is active.
• The call appears on the Call screen on staff consoles and
annunciators.
Patient calls
Patients place nurse calls via the patient station by:
• Pressing the nurse call button on a Smart Pillow Speaker
• Pressing a pushbutton or squeeze pad actuator on a call cord
• Pressing the nurse call button on an electronic bed side-rail
control panel
Canceling a call from the patient station
• Press the Cancel button on the patient station to cancel any
nurse call placed from the patient station.
— or —
• Press any linked Cancel button to cancel calls from the patient
station.
• Pressing Cancel on or for the patient station causes the
following to happen:
• Dome lights and patient room lights extinguish.
• Tones sounding at staff consoles/annunciators and staff follow-
activated stations cease.
• The Call screen nurse call row and any corresponding
Reminders screen reminder row on staff consoles and
annunciators disappear.
• Pressing Cancel cancels all calls in the room but lavatory calls.
Notes
• Normal priority calls are canceled when answered at a staff
console or annunciator.
To Next Page
Loading...
