GE Ultrasonic USM Go User Manual

Chapter 2. Instrument Setup
26 USM Go Operator’s Manual
2.3.1c Setting the Decimal Convention (SETUP-CONFIG1-DECIMAL)
1. In the SETUP menu, activate the CONFIG1 submenu using the joystick ( ). Several functions are displayed on the screen.
2. Use the joystick ( ) to select the function titled DECIMAL, then press the center of the joystick ( ) to activate the function.
The following options are available:
• PERIOD - uses a period as a decimal point
• COMMA - uses a comma as a decimal point
3. To change the decimal convention, either move the joystick or press the function toggle.
4. After making your choice, press the center of the joystick ( ) to deactivate the function.

GE Ultrasonic USM Go Specifications

General

Brand	GE
Model	Ultrasonic USM Go
Category	Measuring Instruments
Language	English