96 50950260/AP1216
Lift arm does not
raise, bucket tilt
works properly.
Lift solenoid valve could be
malfunctioning.
Check electrical connections
to lift solenoid and repair
connections as needed. If lift
solenoid valve is still not
functioning properly, contact
your dealer.
Lift spool in control valve not
actuated or leaking.
Contact your dealer.
Lift arm doesn’t
maintain raised
position with lift
control in NEUTRAL.
Oil leading past lift cylinder
seals (internal or external).
Contact your dealer.
Oil leaking past lift spool in
control valve.
Contact your dealer.
Self-leveling valve
malfunctioning.
Contact your dealer.
Leaking hydraulic hoses,
tubes or fittings between
control valve and cylinders.
Inspect hoses and tubes,
tighten fittings as needed.
Replace as needed.
Lift arm will not lower
or raise.
Lift arm support device
engaged.
Raise lift arm and disengage
support device.
Lift solenoid valve
malfunctioning.
Check electrical connections
to solenoid. Repair or replace
as needed.
Restraint bar not lowered. Lower restraint bar.
Seat or restraint bar switch
malfunction.
Check electrical connections
to the switch. Replace switch
as needed.
Hydraulic System
Problem Possible Cause Remedy
To Next Page
Loading...