Gehl R105 X-Series - Information Center Electronic Display

34 50950260/AP1216
Information Center Electronic Display (DPF
Models)
The information center electronic display is located on the right door pillar. It
provides the following functionality:
• Displays operational status such as engine RPM, coolant temperature and service
hours.
• Displays error fault codes and input/output diagnostic data.
• Configures displays settings.
M. Navigation Rocker Button – Used for general
screen navigation and other various functions,
depending upon screen and context.
P. Increase Brightness/Return Button – Used for
different functions depending upon screen and
context:
• Used to increase display brightness.
Corresponds to the symbol on the
display screen.
• Used to return to previous screen.
Corresponds to the symbol on the
display screen.
N. OK Button – Used for various functions,
depending upon screen and context.
Q. Decrease Brightness Button – Used to
decrease display brightness. Corresponds to
the symbol on the display screen.
ok
Figure 17 – Information Center Electronic Display
M
O
P
Q
N
R