50950260/AP1216 9
during refueling to minimize the build-up of static electricity. Do not use cell
phones while fueling. Make sure the static line is connected from the machine to
the fuel truck before fueling begins.
Ultra-Low Sulfur Diesel (ULSD) poses a greater static ignition hazard than earlier
diesel formulations. Avoid death or serious injury from fire or explosion; consult
with your fuel or fuel system supplier to ensure the entire fuel delivery system is
in compliance with fueling standards for proper grounding and bonding practices.
Safety Decals
The skid-steer loader has decals that provide safety information and precautions
around the loader. These decals must be kept legible. If missing or illegible, they
must be replaced promptly. Replacements can be obtained from your Gehl dealer.
If there is a decal on a part that is to be replaced, be sure that the decal is applied
to the replacement part.
New Decal Application
Surfaces must be free of dirt, dust, grease and foreign material before applying
the decal. Remove the smaller portion of the decal backing paper and apply the
exposed adhesive to the clean surface, maintaining proper position and align-
ment. Peel the rest of the backing paper and apply hand pressure to smooth out
the decal surface. Refer to the following pages for proper decal location. ANSI-
style text decals begin on page 10; ISO-style no-text decals begin on page 13.
To Next Page
Loading...
Need help?
General
